|
| |
|
  |
|
    |
| |
| The CMF valve is a device that reduce the gas flow to an
flow of 0,8 l/pm. An orifice placed in the CMF valve provides this
restriction. This orifice has a hole diameter of 0,08 mm (80uM) (see
Picture 1). In case of a bigger demand of gas you can use the manual
push button. The push button is located at the side of the CMF valve.
When the button is pushed the flow automatically finds the way of the
lowest resistance and goes around the orifice to the output (see Picture
3). The CMF valve has 1 input side and 2 outputs. Because of this it's
possible the change the positions and the direction of the hoses. |
|
|
| |
.jpg) |
|
Specifications |
|
Material: |
AISI 316 |
|
Dimension |
lenght 75 mm diameter 36 mm
weight 450 gram |
|
|
|
|
 |
On the flow chart you can see the inlet pressure through a hole diameter
of 80uM. After this a flow will be created of 0,8 l/pm till 60 mtr. The
limit for sonic flow is around 68 mtr. But to increase the inlet
pressure the flow will be more. To decrease the flow will be less. This
flow chart is for indication only. Later on a download program with
calculations will be available. |
|
|
|
|
|
|
| |
|
|
|
| On this picture you can see the gas inlet and the gas flow
restricted by the orifice and coming out on at the side of the CMF valve
|
 |
 |
On this picture you can see the gas inlet and the gas flow when the push
button is used. The flow will automatically finds it's way of the lowest
resistance and goes around the orifice to the output. The spring on the top
of the push button will close the valve when the push button is released. |
If you want more information please contact us
hydrogom@hydrogom.com or one of our
dealers. |
